Getting The Best Swim Spa Cover

Swim Spas represent distinct challenges when it concerns covering them.
We can all concur that the swim spa has to be covered when not in use for all the same reasons a hot tub requires a cover. The difficulty is that because of the length of the swim spa and the height of the sides, eliminating and changing the cover can be a lot more difficult.
Getting a new swim spa is an amazing occasion in life. You’re eagerly anticipating the exercise you’ll receive from using it. Possibly you’re a little relieved to have lastly selected from the various models you took a look at. At any rate, you probably weren’t believing much about the cover you would use.
Typically, the cover that gets home with your brand-new purchase will be a 4 section stiff foam filled cover that will divide in the center and go off both ends.
No big deal.
Until it starts to get heavy.
Which it always does.
Every stiff foam filled Swim Spa Cover ever made winds up the same way and it is not the fault of the user. It’s a style defect. Integrated in obsolescence since as soon as it is positioned in use over the warm water in your swim spa it is inevitable.
It’s not from rain, so having a taper will not make any distinction. In fact you could have it under a roof and the cover will still get heavy.
The reason is the steam from the water. The particles of steam are very little as they rise from the water surface. They make their way into the little cracks and crevices in the foam. Then as the steam cools it forms back into a liquid and becomes caught in the cover.
It takes place gradually and on a Swim Spa Cover which is made of individual areas, at varying speeds. So eventually you’ll observe a couple of of the areas are really getting heavy. The bar lifters on completions of the swim spa aren’t much help since you still have to raise that heavy cover back up onto the spa which is a lot higher than a routine spa.
This is why SpaCap.com developed a different design for their Swim Spa Covers
Instead of using numerous foam panels to construct Swim Spa Covers that will eventually wind up in some land fill, they developed one that utilizes air chambers that don’t suck up wetness.
In fact SpaCap.com Swim Spa Covers are lightweight, insulate much better, will not blow away in a wind storm or be damaged by snow or hail.
Covered with Sunbrella Marine material, these covers will not fade, or break down at the seams either. So if you own a swim spa, and you mean to keep using it daily, SpaCap.com has the cover for it.
If you’re not ready to order today, bookmark this site so you can discover it again when you’re ready!

Leave a Reply

Your email address will not be published. Required fields are marked *