Why Your Swim Spa Cover Stinks!

Hey, no offense, however your Swim Spa Cover smells bad. Maybe you’ve gotten used to it?
Don’t worry, it takes place to all spa owners at some time or another; water is one of nature’s most erosive compounds. Moisture leaks in and ends up being trapped in between the external vinyl shell and the cling wrap foam cores. The warm, wet environment is best for mold and mildew and other kinds of foul-smelling things.
If wetness has permeated even more into the plastic wrapped foam core, the cover becomes waterlogged, which can quickly grow all sorts of dark and stinky slime, however likewise make the cover actually difficult to eliminate, and not as effective at keeping the heat in the spa. Time for a better kind of Swim Spa Cover

Smelly Swim Spa Cover?!?
• Broken or damaged. Split foam cores, ripped or worn spots, torn joints. A Swim Spa Cover that loses it’s arched roofing line, to keep water draining pipes off properly, will eventually start to puddle water, which is most likely time to buy a new Swim Spa Cover! A Swim Spa Cover with threadbare spots in the vinyl is also bad news, and although you can stave off the unavoidable with a duct tape repair, the water will win, ultimately.
• Not Removed Regularly. Eliminate your Swim Spa Cover weekly for 2 hours of airing out. A better Swim Spa Cover can endure longer durations, but it’s a great routine to eliminate the cover and let it get some air on a weekly basis. If you can easily open the zipper to allow wetness to escape do so, but don’t eliminate fragile foam panels unless definitely essential.

Actually, this is just hogwash The problem is the foam itself. It would be great if it were put into use in a totally dry setting. Unfortunately, swim spas by their very nature are filled with warm water. Warm water creates steam and steam rises up and gets into the cracks and crevises in the foam until it gets so heavy you can’t lift it anymore. The only way to avoid it is to never put it on the swim spa.
• Poorly Made. It’s easy to make a Swim Spa Cover with tape and staples, but it will not stop moisture extremely well. Even the best foam filled Lightweight Swim Spa Covers with vacuum-wrapped and heat bonded seam are not going to keep the extreme wetness from your spa from reaching the foam core. The only genuine option is a Swim Spa Cover utilizes air to insulate rather than foam.
• Bad Spa Water. If the spa water is not maintained regularly with sanitizer and filtering, or is not surprised often enough, bacteria and algae can benefit from a congenial environment to thrive. Low pH, high chlorine or high ozone levels can likewise weaken the underside of your Swim Spa Cover cover. Since the cover is so close to the spa, it soaks up the chemistry of the spa. Clean, clear and hygienic water is the best environment to prevent foul-smelling spa covers. (Sorry but this is simply BS) The fact is the areas in the foam are nearly laboratory conditions for growing mold and mildew. Your spa chemistry is not going to stop that.
• Not Cleaned/ Conditioned. For outdoor Lightweight Swim Spa Covers, unless your back deck is covered or your spa remains in a gazebo, you have sun, rain, pollen, dust, pollution, and animals to contend with. If you have a partial roof, that can be worse than no roof at all, if an overhanging eave drains water onto the Swim Spa Cover Tidy and condition a spa cover 2-4 times per year, so that it always looks terrific, and is protected from the components. Again, this actually isn’t going to stop the mold and mildew from growing inside a foam cover However it will assist your spa dealer pay their costs. If this were actually true a Swim Spa Cover inside would never get smelly and that just isn’t true.

Your Choices

Fix Your Swim Spa Cover!
• Remove to Safe Location: This first step may seem obvious, but you need a good place to permit the cover to sit undisturbed from pets, wild animals, and winds. It ought to be a sunny place if possible, or a dry indoor location with low humidity can likewise be used.
• Deodorize & Disinfect: You might not have to do both, it’s finest to be as gentle as possible. Don’t use home cleaning products on your Swim Spa Cover, odd chemicals can end up in your spa water. Gently tidy all exterior surfaces with spa cover cleaner, and allow the panels to dry.
• Remove the Panels: Again, this should be prevented if possible, because the panels might become harmed throughout elimination or cleansing. However if you figure out that there is something slimy within, you can typically unzip and eliminate the panel for a cleansing inside and out.

How frequently does your spa dealer anticipate you to do all this? If your swim spa is protected from the majority of sun and rain, twice per year. If it’s out in the open it ought to be 3-4 times annually. Let that sink in a minute. Getting the foam panels in and out of the cover (something that was never designed to be done after it was initially constructed) will just cause it to rip apart or breakdown even faster. 

Better Choice
The simplest remedy for a smelly Swim Spa Cover is to just buy a different sort of Swim Spa Cover A smelly swim spa cover just implies that your cover is handling moisture, and things are starting to grow! Lightweight Swim Spa Covers from SpaCap.com that doesn’t use foam however has actually sealed air chambers rather will prevent giving the mold and mildew a place to grow in the first place.

Leave a Reply

Your email address will not be published. Required fields are marked *